- Page d'accueil /
- Automobile /
- Pièces de rechange automobile /
- Sensors /
- Mass Air Flow /
- Jet Performance 69138 Powr-Flo Mass Air Senso...
Jet Performance 69138 Powr-Flo Mass Air Sensor
77% des répondants recommanderaient ceci à un ami
XOF 186435
Détails du prix
Hors frais de livraison et de douane ( Les frais de livraison et de douane seront calculés lors du paiement )
*Tous les articles seront importés depuis États-Unis
QTY:
Ubuy s'engage à protéger votre sécurité et votre confidentialité. Notre système avancé de sécurité des paiements garantit la confidentialité en chiffrant vos informations lors de la transmission grâce aux protocoles AES (Advanced Encryption Standards) et SSL (Secure Socket Layer). Vos coordonnées de paiement sont 100 % sécurisées car nous ne partageons pas vos informations de paiement avec des vendeurs tiers.
Increase performance of your vehicle with our Performance Mass Air Sensor
Livraison
rapide
Retour
gratuit*
Emballage sécurisé
Produits 100 % originaux
Conformité PCI DSS
Certifié ISO 27001
Ce qui se démarque
Détails du produit
- Designed to increase vehicle performance
- Direct factory replacement for easy installation
- Compatible with other performance upgrades
- Includes updated electronics pre-installed
- CARB approved for emissions compliance
À qui est-ce destiné ?
-
Performance Enthusiasts
Users seeking to enhance engine efficiency and power through optimized air intake will benefit from this sensor.
-
DIY Mechanics
Those who enjoy installing aftermarket parts themselves will find this sensor easy to install and configure.
-
Tuner Vehicles
Car enthusiasts looking to fine-tune their vehicles for better performance should consider this mass air sensor.
-
Standard Commuters
Users needing a reliable mass air sensor without performance enhancements may find it unnecessary.
DESCRIPTION DU PRODUIT
Jet Performance 69138 Powr-Flo Mass Air Sensor
Questions et réponses des clients
-
question:
What is the Jet Performance 69138 Powr-Flo Mass Air Sensor?
répondre: The Jet Performance 69138 Powr-Flo Mass Air Sensor is a high-performance sensor designed to optimize air flow into your vehicle's engine. By precisely measuring the mass of air entering the engine, this sensor enhances the air-fuel ratio, improving overall engine efficiency. This upgrade is particularly beneficial for vehicles that have been modified for greater performance, as it allows for improved combustion and increased horsepower. It’s an ideal choice for car enthusiasts looking to gain more power and fuel efficiency without extensive modifications. -
question:
How does the Jet Performance Powr-Flo Mass Air Sensor improve engine performance?
répondre: The Jet Performance Powr-Flo Mass Air Sensor improves engine performance by providing more accurate readings of the air intake. With precise measurements, the engine control unit (ECU) can better adjust fuel delivery, ensuring optimal combustion. This leads to enhanced acceleration, improved throttle response, and potential gains in horsepower. If you have upgraded your exhaust system or installed a cold air intake, using this mass air sensor will help maximize the benefits of those modifications by ensuring that the engine runs at its best. -
question:
Is the Jet Performance 69138 compatible with my vehicle?
répondre: To determine compatibility, you should check the product specifications listed for the Jet Performance 69138 Powr-Flo Mass Air Sensor. This sensor is designed to fit a variety of applications, particularly for certain makes and models of vehicles, often focusing on American muscle cars and trucks. If you have a modified vehicle or one that tends towards higher performance, it’s likely compatible. Always verify fitment with your vehicle's specifications or consult with a performance parts expert prior to purchasing. -
question:
Will installation of the Powr-Flo Mass Air Sensor require professional help?
répondre: While many car enthusiasts can install the Jet Performance Powr-Flo Mass Air Sensor themselves with basic tools, professional installation is recommended for those unfamiliar with vehicle modifications. The installation process involves disconnecting the battery, removing the old mass air sensor and placing the new one into the air intake system. Proper installation ensures that the sensor operates correctly, significantly affecting engine performance. If you're unsure or want peace of mind, seeking professional assistance can help achieve optimal results. -
question:
What benefits can I expect after installing the Powr-Flo Mass Air Sensor?
répondre: After installing the Jet Performance Powr-Flo Mass Air Sensor, you can expect improved throttle response, better acceleration, and potentially increased fuel efficiency. The enhanced airflow measurements allow your engine to perform more effectively, optimizing air and fuel inputs. Additionally, drivers have reported smoother engine operation and improved overall vehicle performance, especially during acceleration or under load. This product is particularly advantageous if your vehicle has other performance upgrades, as it helps tie them all together for maximum effect. -
question:
Does this Mass Air Sensor alter vehicle emissions?
répondre: The Jet Performance Powr-Flo Mass Air Sensor is designed to enhance performance without compromising emissions compliance. It provides more accurate mass air flow readings which in turn facilitate optimal combustion. While improved engine performance can lead to changes in emissions, this sensor is intended to work within the parameters of most vehicles’ emissions systems. If you are concerned about emissions compliance, it's advisable to consult your local regulations or an automotive professional to ensure fitment aligns with legal requirements. -
question:
How does the Jet Performance Powr-Flo Mass Air Sensor compare to stock sensors?
répondre: The Jet Performance Powr-Flo Mass Air Sensor offers superior performance and accuracy compared to stock sensors. While factory sensors can be adequate, performance sensors like the Powr-Flo provide enhanced airflow measurement which leads to better fuel mapping and combustion efficiency. This results in increased power and responsiveness. Users that have upgraded from a stock sensor often report noticeable improvements in their vehicle's performance, especially in modified cars where every bit of tuning counts towards overall capability. -
question:
Can the Powr-Flo Mass Air Sensor affect my vehicle's fuel economy?
répondre: Yes, the Jet Performance Powr-Flo Mass Air Sensor can positively affect your vehicle's fuel economy. By providing precise airflow data to the engine control unit, it enables more efficient combustion, which can lead to reduced fuel consumption. While this performance-enhancing part is primarily focused on improving power and throttle response, an accurately tuned engine often operates more efficiently, ultimately leading to better mileage in everyday driving scenarios. -
question:
Do I need to tune my vehicle after installing the Powr-Flo Mass Air Sensor?
répondre: While not always necessary, tuning your vehicle after installing the Jet Performance Powr-Flo Mass Air Sensor can maximize performance gains. Tuning allows the engine control unit to adjust fuel maps and optimize performance around the new sensor's capabilities. This tuning process optimizes the air-fuel mixture for improved efficiency and responsiveness, particularly for performance vehicles or those with additional modifications. If you're looking to extract the most performance from your upgrade, consider a professional tune following installation. -
question:
Where can I buy Jet Performance 69138 Powr-Flo Mass Air Sensor in Cote dIvoire?
répondre: You can purchase the Jet Performance 69138 Powr-Flo Mass Air Sensor from Ubuy, a reliable e-commerce platform that specializes in performance car parts and accessories. Ubuy offers a wide selection of automotive products, making it easy to find the Powr-Flo Mass Air Sensor you need, along with other performance upgrades for your vehicle. Their customer service and user-friendly website ensure you have a smooth buying experience.
Jet Mass Air Flow Editorial Review
The Jet Performance 69138 Powr-Flo Mass Air Sensor is a worthwhile investment to complement a cold air intake. It provides a noticeable gain in horsepower and can improve torque and fuel efficiency. Some customers have seen improvements in engine performance and reduced engine noise. The installation is easy and it is compatible with certain vehicle models.
Avis et évaluations clients
-
5 étoile
100%
-
4 étoile
0%
-
3 étoile
0%
-
2 étoile
0%
-
1 étoile
0%
Donnez votre avis sur ce produit
Partagez votre avis avec d'autres clients
Avantages
- Noticeable gain in horsepower
- Improves torque
- Can improve fuel efficiency
- Easy to install
- Compatible with certain vehicle models
Les inconvénients
- Mixed reviews about its performance
CONFIANCE EN LA PLATEFORME & PROTECTION DE L'ACHETEUR
“Easy to use and always helpful and sorts any issues I've had past and present”
“I always receive support when I engage customer service. Overall my experience with UBUY has been top notch. Keep up the good work.”
“The delivery was fast and the product came undamaged and authentic.”
“Ubuy is extremely efficient and to order online is an easy process. The verity of products to buy is really unlimited! My order was urgent and I got it on time. The products are great! Thank you Ubuy!”
“Fast, convenient and cheap. Great store!”
Historique des prix du produit
Informations importantes
- Limitations : Pour les produits expédiés à l'international, veuillez noter que toute garantie du fabricant peut ne pas être valide ; les options de service du fabricant peuvent ne pas être disponibles ; les manuels, instructions et avertissements de sécurité des produits peuvent ne pas être dans les langues du pays de destination ; les produits (et les matériaux qui les accompagnent) peuvent ne pas être conçus conformément aux normes, spécifications et exigences d'étiquetage du pays de destination ; et les produits peuvent ne pas être conformes à la tension et aux autres normes électriques du pays de destination (nécessitant l'utilisation d'un adaptateur ou d'un convertisseur le cas échéant). Il incombe au destinataire de s'assurer que le produit peut être importé légalement dans le pays de destination. En cas de commande auprès d'Ubuy ou de ses filiales, le destinataire est l'importateur officiel et doit se conformer à toutes les lois et réglementations du pays de destination.
- Tous les produits listés sur Ubuy ne sont pas à vendre, Ubuy étant un moteur de recherche mondial. Les produits sont soumis aux réglementations en matière d'exportation et de commerce.
XOF 186435
Commandez maintenant et recevez votre commande aux alentours du Jeudi, Septembre 17
This item is not restrict in my country.(Please click on above link if this item is not restrict in your country, So our team will review and allow.)
QTY:
Conforme PCI DSS et certifié ISO 27001:2022, avec des paiements chiffrés et une protection complète de l'acheteur pour chaque commande.
Caractéristiques et avantages
- Direct replacement for stock sensor
- Allows for quick installation
- Compatible with other aftermarket upgrades
- Easy factory replacement
- Includes updated electronics
- CARB Approved
Assurance Ubuy
Profitez d'une expérience d'achat sereine avec des produits 100 % originaux, une sécurité de paiement conforme PCI DSS, une protection des données certifiée ISO 27001, la livraison transfrontalière la plus rapide, les retours gratuits* et un emballage sécurisé pour chaque commande.